Getbeacon, Getdcbparams – Dell Emulex Family of Adapters User Manual
Page 1350
OCM for VMware vCenter Version 10.2 User Manual
P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1350
Note:(pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
getbeacon
Syntax
elxvcpcmd.exe v=
h=
Description
This command shows the current beacon state, ON or OFF.
Parameters
getdcbparams
Syntax
elxvcpcmd.exe v=
h=
Description
This command extracts the DCB parameters associated with a given FCoE, NIC or
iSCSI port.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of the FC or FCoE port.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of the FC or FCoE port.
MAC
The MAC address of the NIC or iSCSI port.