Dell Emulex Family of Adapters - Manual (Page 1346)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1346
exportsaninfo
Note: Emulex recommends that you redirect this output to a file with a proper
extension, .xml for XML-formatted files and .csv for CSV-formatted files. Due to
the amount of information that must be obtained and reported, this command
can take a long time on large SAN configurations.
Syntax
elxvcpcmd.exe v= u= p=
exportsaninfo [format]
Note: [format] is optional. If the format parameter is specified as csv, the
adapter information is shown in csv format. If the format parameter is
specified as xml, the adapter information is shown in xml format.
Leaving the format parameter blank shows the data in xml format.
Description
This command exports all SAN information related to Emulex adapters in all the hosts
in a cluster. This command is supported only at the cluster level.
Parameters
firmwareupdate
Syntax
For a cluster:
elxvcpcmd.exe v= u= p= c=
firmwareupdate [all|WWNs|MACs]
For a host:
elxvcpcmd.exe v= u= p= h=
firmwareupdate [all|WWNs|MACs]
Description
This command updates the firmware on the Emulex adapters found in the specified
VMware cluster or the ESXi host.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
c
The cluster name.
Format
csv – The output information in CSV format.
xml – The output information in XML format (default).