Dell Emulex Family of Adapters - Manual (Page 890)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
890
0277: lpfc_enable_node: ndlp:x%pusgmap:x%x refcnt:%d, void *)ndlp,
ndlp->nlp_usg_map, atomic_read(&ndlp->kref.refcount)
Enable node was attempted on an inactive node.
Data: None
Severity: Warning
Log:
LOG_NODE
Action: None required.
0278: lpfc_enable_node: ndlp:x%pusgmap:x%x refcnt:%d, void *)ndlp,
ndlp->nlp_usg_map, atomic_read(&ndlp->kref.refcount)
Enable node was attempted on an inactive node.
Data: None
Severity: Warning
Log:
LOG_NODE
Action: None required.
0280: lpfc_cleanup_node: ndlp:x%pusgmap:x%x refcnt:%d, void *)ndlp,
ndlp->nlp_usg_map, atomic_read(&ndlp->kref.refcount)
Node clean-up was attempted on a node that has already been marked for memory free.
Data: None
Severity: Warning
Log:
LOG_NODE
Action: None required.
0281: lpfc_cleanup_node: ndlp:x%pusgmap:x%x refcnt:%d, void *)ndlp,
ndlp->nlp_usg_map, atomic_read(&ndlp->kref.refcount)
Node clean-up was called to prepare the node for release.
Data: None
Severity: Warning
Log:
LOG_NODE
Action: None required.
0282: ldid:x%x ndlp:x%pusgmap:x%x refcnt:%d, ndlp->nlp_DID, (void *)ndlp,
lpfc_init.c-ndlp->nlp_usg_map,
Driver clean-up has found a node that is still on the node list during driver unload or PCI hotplug
removal.
Data: None
Severity: Error
Log:
LOG_NODE
Action: None required.
0283: Failed to allocate mbox cmd memory
Mailbox allocation error.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)