Dell Emulex Family of Adapters - Manual (Page 904)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
904
0400: lpfc_nodev_tmo attribute cannot be set to , allowed range is
[,
The attempt to set the devloss timeout value failed because the value is out of the allowable range.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Use a value between the minimum and maximum values.
0401: Ignoring change to nodev_tmo because devloss_tmo is set
Attempting to change the nodev timeout when the devloss has already been set.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
0402:Cannot find virtual addr for buffer tag on ring
A DMA buffer is unavailable for this unsolicited command.
Data: (1) tag (2) next (3) prev (4) postbufq_cnt
Severity: Error
Log:
LOG_INIT
Action: None required.
0403: lpfc_nodev_tmo attribute cannot be set to , allowed range is
[, ]
Attempt to set the nodev timeout value is outside the range of the devloss timeout range.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Set the nodev timeout between the minimum and maximum timeout range.
0404: lpfc_devloss_tmo attribute cannot be set to , allowed range is
[, ]
Attempt to set the devloss timeout value is outside the allowed range.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Set the devloss timeout between the minimum and maximum devloss range.
0405: lpfc_link_speed attribute cannot be set to %d, allowed values are
["LPFC_LINK_SPEED_STRING"]
Attempt to set the link speed value is outside the allowed range.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Set the link speed between 0 and the maximum.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)