Dell Emulex Family of Adapters User Manual

Page 429

OneCommand Manager Command Line Interface Version 10.2 User Manual

P010067-01A Rev. A

5. CLI Client Command Descriptions

Profile Management Commands

429

Examples Using GetAdatperPortConfig
NPar disabled - 2 Ports, NParEP Mode Disabled

>hbacmd getadapterportconfig 00-00-c9-12-34-56

Number of Ports : 4

Maximum FCoE Functions : 4

Maximum iSCSI Functions : 4

Mixed Mode I/O Allowed : Yes

Concurrent Mode I/O Allowed : Yes

ROCE Functions Allowed : Yes

RebootRequired : No

Active Configuration

Profile ID : 16

MC Type : None

Port Assignments:

Port 1: NIC

Port 2: NIC

Reboot Configuration

Profile ID : 16

MC Type : None

Port Assignments:

Port 1 (p0): NIC

Port 2 (p1): NIC

Note:(pN) labels are the port parameter names to use in the

SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).

NPar enabled - 2 Ports, NParEP Mode Enabled on Reboot