Dell Emulex Family of Adapters User Manual
Page 946
Emulex Drivers Version 10.2 for Linux User Manual
P010081-01A Rev. A
4. Troubleshooting
Log Messages
946
2524: Failed to get the non-embedded SGE virtual address
The READ_FCF_RECORD mailbox command could not retrieve the SGE that was requested.
Data:
None
Severity: Error
Log:
LOG_MBOX
Action:
None required.
2527: Failed to allocate non-embedded SGE array.
Failed to allocate the non-embedded SGE array.
Data:
None
Severity: Error
Log:
LOG_MBOX
Action:
None required.
2528: Mailbox command
The mailbox command could not be issued because the mailbox interrupt is disabled.
Data:
(1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
2529: Mailbox command
Data:
(1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
2530: Mailbox command
The SLI layer in the driver is inactive.
Data:
(1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
2531: Mailbox command
Data:
(1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
2532: Mailbox command
The mailbox bootstrap code detected that the SLI layer is active.
Data:
(1) sli4_mbox_opcode (2) sli_flag,(3) MBX_POLL
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
2533: Mailbox command
Data:
(1) sli4_mbox_opcode (2) sli_flag (3) MBX_NOWAIT
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)