Dell Emulex Family of Adapters - Manual (Page 895)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
895
0320: CLEAR_LA mbxStatus error hba state
The driver issued a CLEAR_LA mailbox command to the HBA that failed.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a firmware or hardware issue. Report these errors to Technical
Support.
0322: Ring handler: unexpected completion IoTag
The driver could not find a matching command for the completion received on the specified ring.
Data: (1) ulpStatus, (2) ulpWord[4], (3) ulpCommand, (4) ulpContext
Severity: Warning
Log: LOG_SLI
verbose
Action: This error could indicate a software driver or firmware issue. If this issue persists, report
these errors to Technical Support.
0323: Unknown Mailbox command Cmpl
A unknown mailbox command completed.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a software driver, firmware or hardware issue. Report these
errors to Technical Support.
0324: Config port initialization error, mbxCmd READ_NVPARM,
mbxStatus
READ_NVPARMS mailbox command failed during port configuration.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a software driver, firmware or hardware issue. Report these
errors to Technical Support.
0328: Rsp Ring error: IOCB Data:
The firmware has returned an error for this IOCB.
Data: (1) , (2)
Severity: Warning
Log:
LOG_SLI
Action: None required.
0330: IOCB wake NOT set
The completion handler associated with the IOCB was never called.
Data: (1) timeout (2) timeleft/jiffies
Severity: Error
Log:
Always
Action: This error could indicate a software driver, firmware or hardware issue. If this issue
persists, report the error to Technical Support.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)