Dell Emulex Family of Adapters - Manual (Page 371)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
FCoE Commands
371
Parameters
Example
hbacmd GetFIPParams 10:00:00:00:c9:5b:3a:6d
SetFIPParam
This command sets the FIP parameters of the adapter in FCoE mode.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
SetFIPParam
Parameters
Example
hbacmd SetFIPParam 10:00:00:00:c9:5b:3a:6d fcmap 0x0efc99
WWPN
The WWPN of an FCoE port.
WWPN
The WWPN of an FCoE port.
Param
The FIP parameter name:

pfabric

pswitch

vlanid

fcmap

cinvlanid
Value
The value based on the FIP parameter name:

pfabric: 8-byte fabric name (format XX:XX:XX:XX:XX:XX:XX:XX)

pswitch: 8-byte switch name (format XX:XX:XX:XX:XX:XX:XX:XX)

vlanid: 2-byte VLAN ID [0-4095] or “any” for any VLANID

fcmap: 3-byte FC_map, 0x0EFCxx

cinvlanid: 2-byte VLAN_ID [0-4095]