Dell Emulex Family of Adapters - Manual (Page 1075)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1075
elx_mes0602: Failed to allocate CQ_EVENT entry
DESCRIPTION: Failed to allocate a CQ_EVENT entry.
DATA: None
ACTION: None required.
elx_mes0603: Invalid work queue CQE subtype
DESCRIPTION: Invalid work queue CQE.
DATA: None
ACTION: None required.
FCP Traffic History (0700 - 0799)
elx_mes0700: Bus Reset on target failed
DESCRIPTION: The bus reset for the specified target failed.
DATA: None
ACTION: None required.
elx_mes0706: IOCB Abort failed - outstanding failed
DESCRIPTION: The driver did not recover all I/O following a reset task management
command.
DATA: (1) outstanding I/O count (2) number of unrecovered I/O
ACTION: Reset call fails to. ESXi tries to recover.
elx_mes0713: SCSI layer issued Device Reset (, ) reset
status flush status
DESCRIPTION: A device reset has completed on (tgt, lun). Status values are displayed.
DATA: (1) tgt (2) lun (3) task mgmt status (4) flush status
ACTION: None required.
elx_mes0714: SCSI layer issued bus reset
DESCRIPTION: The SCSI layer is requesting the driver to abort all I/Os to all targets on
this adapter.
DATA: (1) ret
ACTION: Check the state of the targets in question.
elx_mes0717: FCP command residual underrun converted to error
Data:
DESCRIPTION:
DATA: None
ACTION: None required.