Dell Emulex Family of Adapters - Manual (Page 1059)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1059
elx_mes0376: READ_REV Error. SLI Level FCoE enabled & HBA_FCOE_SUPPORT>
DESCRIPTION: This SLI-4 only adapter setup function was called for a non-SLI-4
device.
DATA: None
ACTION: None required.
elx_mes0377: Error parsing vpd. Using defaults.
DESCRIPTION: Could not parse the VPD data, so the driver is using the default values.
DATA: None
ACTION: None required.
elx_mes0381: Error during queue setup.
DESCRIPTION: Could not set up all the queues that driver requires to exchange I/Os
with the adapter.
DATA: None
ACTION: Reload the driver.
elx_mes0382: READ_SPARAM command failed status ,
mbxStatus
DESCRIPTION: The READ_SPARAM mailbox command has failed during
initialization. The adapter has been set to error state.
DATA: None
ACTION: Take a dump with hbacmd and then try reloading the driver.
elx_mes0383: Error during scsi sgl post operation
DESCRIPTION:
DATA: None
ACTION: None required.
elx_mes0384: There is pending active mailbox cmd
DESCRIPTION: The mailbox commands have overlapped. This command should have
been added to the mailbox queue.
DATA: None
ACTION: None required.