Dell Emulex Family of Adapters - Manual (Page 932)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
932
1405: Failed to initialize iocb list.
Driver resource initialization failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1406: Failed to set up driver resource.
Initialization failed to set up driver resource.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1407: Failed to create scsi host.
Initialization failed to create SCSI host.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1408: Failure HBA POST Status: sta_reg=0x%x, ""perr=x%x, sfi=x%x, nip=x%x,
ipc=x%x, xrom=x%x, ""dl=x%x, pstatus=x%x\n", sta_reg.word0,
bf_get(lpfc_hst_state_perr, &sta_reg),
The HBA’s power on self test has failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1409: Failed to enable pci device.
Failed to enable PCI device during initialization.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1410: Failed to set up pci memory space.
Initialization failed to set up PCI memory space.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
1411: Failed to set up driver resource.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)