Dell PowerEdge RAID Controller H700 User Manual
User’s guide
Table of contents
Document Outline
- Safety Instructions
- Overview
- Storage Controller Features
- Physical Disk Power Management
- Using the SMART Feature
- Initializing Virtual Disks
- Consistency Checks
- Disk Roaming
- Disk Migration
- Virtual Disk Write Cache Policies
- Virtual Disk Read Cache Policies
- Reconfiguring Virtual Disks
- Fault Tolerance Features
- Using Persistent Hot Spare Slots
- Physical Disk Hot Swapping
- Failed Physical Disk Detection
- Redundant Path With Load Balancing Support
- Using Replace Member and Revertible Hot Spares
- Controller Cache Preservation
- Cache Preservation With Battery
- Cache Preservation With Non-Volatile Cache (NVC)
- Cache Data Recovery
- Battery Learn Cycle
- Patrol Read
- Installing and Configuring Hardware
- Installing the PERC H700 and H800 Adapters
- Removing the PERC H700 and H800 Adapters
- Removing and Installing the PERC H700 Modular Card in Dell Blade Systems
- Removing the DIMM From a PERC H700
- Installing the DIMM on a PERC H700
- Replacing the BBU on a PERC H700
- Removing the TBBU or TNVC From a PERC H800 Adapter
- Replacing the Battery and Battery Cable Onto the DIMM of a PERC H800 Adapter
- Installing the TBBU or TNVC on a PERC H800 Adapter
- Transferring a TBBU or TNVC Between PERC H800 Cards
- Setting up Redundant Path Support on the PERC H800 Adapter
- Reverting From Redundant Path Support to Single Path Support on the PERC H800 Adapter
- Driver Installation
- Installing Windows Drivers
- Creating the Driver Media
- Pre-Installation Requirements
- Installing Driver During a Windows Server 2003 Operating System Installation
- Installing Driver During a Windows Server 2008, Windows Server 2008 R2 Installation
- Installing Windows Server 2008, Windows Server 2008 R2, Windows Server 2003 for a New RAID Controller
- Updating Existing Windows Server 2008, Windows Server 2008 R2, Windows Server 2003
- Installing Linux Driver
- Installing Solaris Driver
- Installing Windows Drivers
- Configuring and Managing RAID
- Dell OpenManage Storage Management
- BIOS Configuration Utility
- Virtual Disk Management
- Creating Virtual Disks
- Initializing Virtual Disks
- Checking Data Consistency
- Importing or Clearing Foreign Configurations Using the VD Mgmt Menu
- Importing or Clearing Foreign Configurations Using the Foreign Configuration View Screen
- Managing Preserved Cache
- Managing Dedicated Hot Spares
- Deleting Virtual Disks
- Deleting Disk Groups
- Clearing the Configuration
- BIOS Configuration Utility Menu Options
- Physical Disk Management
- Controller Management
- CacheCade
- Security Key and RAID Management
- Troubleshooting
- Regulatory Notices
- Corporate Contact Details (Taiwan Only)
- Glossary
- Index