Dell Emulex Family of Adapters - Manual (Page 486)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Running the Standalone Adapter Management Utility
486
The elxflash.bat script is used to configure the environment, run elxflash, and revert
any changes before exiting. This script installs the MILI service if it is not installed.
The winlpcfg.bat script is used to configure the environment, run winlpcfg, and
revert any changes before exiting. This script installs the MILI service if it is not
installed.
Notes:

The MILI service is temporarily installed. The service is removed once the script
execution is completed.

If OneCommand Manager is installed, the OneCommand Manager libraries are
used by the elxflash and winlpcfg utilities.

The winlpcfg.bat and elxflash.bat scripts call the native versions of elxflash.exe
and winlpcfg.exe. For example, on Windows x64, the 64-bit utilities are called.

The adapter being managed by the Standalone Adapter Management utility
must not be managed simultaneously by other Emulex utilities including
OneCommand Manager.
5. To update firmware and bootcode on an adapter in Windows, type
# elxflash.bat /auto /up
To display a list of HBAs in Windows, type
# winlpcfg.bat listhba
from the Win directory
Each time elxflash or lpcfg is run, a log file is created. On Windows these files are
called:
C:\clu\log\elxflash.log
C:\clu\log\winlpcfg.log
Linux
Note: Running 32-bit applications on Linux x86_64 is not supported. The .bat file only
runs native executable files.
1. Extract kit contents.
2. Change directory (cd) to elxflashStandalone-linux-.
The following directories should be present:

boot\

firmware\

lx\
3. For Elxflash, copy firmware images to the firmware directory. Copy boot images to
the boot directory.
Note: For Elxflash, each operating system architecture directory includes a
fwmatrix.txt file. You must use the fwmatrix.txt directory that matches the
current operating system architecture.
4. Change directory (cd) to the lx directory.