Dell Emulex Family of Adapters - Manual (Page 491)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Viewing Adapter Information
491
For example, either:
oslpcfg help download
or
oslpcfg ? download
returns a response similar to the following:
Resetting an Adapter (reset)
This command resets a specific adapter or all adapters in the system.
Syntax:
To reset one adapter, type
oslpcfg reset n=
To reset all adapters in the system, type
oslpcfg reset n=all
Running the Power-On Self-Test (posttest)
This command runs the POST on the selected adapter.
To run the adapter POST test, type
oslpcfg posttest n=
The following example runs the POST test on adapter #1.
oslpcfg posttest n=1
Viewing Adapter Information
Viewing Emulex Conventional Names Instead of VPD (- /c)
Adding /c to any command that uses the a= parameter to return adapter data causes
the command to return an Emulex conventional model for the adapter rather than the
model name in the adapter. /c can be used for any command that displays the model
name. For instance, the following commands use the a= parameter and show this
behavior.

config

download

directdownload
Note: The offline utility does not always display the model name of the adapter being
tested.
download
or
download