Dell Emulex Family of Adapters - Manual (Page 65)

OneCommand™ Manager Application P010066-01A Rev. A
2. Installing and Uninstalling OneCommand Manager Application Components
Installing the OneCommand Manager Application
65
/usr/lib64. The i386 build requires the 32-bit version, which is
installed in /usr/lib.

Previous versions of the Linux driver must be uninstalled. You must run the
uninstall script that shipped with the version of the Linux driver you want to
remove.
Attended Installation in Linux
To install the OneCommand Manager application, or upgrade an existing installation,
in Linux:
1. Log on as ‘root’.
2. Download the utilities from the Emulex website.
3. Copy the OneCommand elxocm--.tgz file to a directory on
the install machine.
4. Change to the directory to which you copied the tar file.
5. Untar the file.

For RHEL 5 and RHEL 6 type
tar zxvf elxocm-rhel5-rhel6--.tgz

For SLES 11 type
tar zxvf elxocm-sles11--.tgz
6. Change to the elxocm directory created in step 3.

For RHEL 5 and RHEL 6 type
cd elxocm-rhel5-rhel6--

For SLES 11 type
cd elxocm-sles10-sles11--
Note: Prior to installation, OneCommand Manager application groups must be
configured on the LDAP network or the local host machine for Secure
Management operation. See “OneCommand Manager Secure Management
Configuration Requirements” on page 85 for configuration instructions.
7. Run the install script. Type
./install.sh
8. When prompted, choose whether or not to enable Secure Management for
OneCommand:
Do you want to enable Secure Management feature for OneCommand?
(s/u)
Enter 's' to select secure management. (LDAP/NIS OCM group
configuration required)
Enter 'u' to run without secure management (default).
Enter the letter 's' or 'u'.
If you enter ‘s’, proceed to step 11. You cannot choose a Management Mode as
described in step 10.