Dell Emulex Family of Adapters - Manual (Page 1207)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
FC and FCoE Ports
1207
Maintenance Tab Field Definitions
FC Port Firmware Area

Current Version – The Emulex firmware version number for this model of
adapter.

Initial Load – The firmware version stub responsible for installing SLI code into
its proper slot.

SLI-2 Name – The name of the SLI-2 firmware overlay.

Kernel Version – The version of the firmware responsible for starting the driver.

Operational Name –The name of the operational firmware for the selected
adapter.

SLI-1 Name – The name of the SLI-1 firmware overlay.

SLI-3 Name – The name of the SLI-3 firmware overlay.
FCoE Port Firmware Area

Firmware Version on Flash – The firmware version stored on the adapter’s
non-volatile storage. When the system restarts, this version becomes the active
firmware version.

Service Processor FW Version – The firmware version that is operational on the
adapter.

Active Firmware Version – The firmware version running on the selected
adapter.

ULP FW Name – The firmware version running on the ULP processors within
the ASIC.
WWN Management Area (FC and FCoE)
Current

WWPN – The WWPN for the selected adapter port.

WWNN – The WWNN for the selected adapter port.
Pending Changes

WWPN – If the WWPN has been changed, the new WWPN is displayed in this
list until the system is rebooted. Once rebooted, the new WWPN is displayed in
the Current list.

WWNN – If the WWNN has been changed, the new WWNN is displayed in this
list until the system is rebooted. Once rebooted, the new WWNN is displayed in
the Current list.
Maintenance Tab Buttons (FC and FCoE)

Change WWN – Click to change the selected adapter port's WWPN or WWNN.
Refer to “Changing WWN Configuration for an FC Port” on page 74 for more
information.