Dell Emulex Family of Adapters - Manual (Page 855)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
3. Configuration
iSCSI Driver Configuration
855
In this command, is the IP address and port number and is the
name of the iface created in step 1.
6. Add the iSCSI driver MAC address:
iscsiadm -m iface -I --op=update -n iface.hwaddress
-v
In this command, is the name of the iface created in step 1.
7. Set the initiator’s IP address:
iscsiadm -m iface -I -o update -n iface.ipaddress -v
In this command, is the name of the iface created in step 1 and is
the IP address.
8. Log into the target:
iscsiadm -m node -T -p -I -l
In this command, is the target name you want to log into;
is the IP address and port number; and is the name of the iface created in
step 1.
9. Verify that the disk shows:
fdisk -l
10. Log out:
iscsiadm -m node -T -p -I -u
In this command, is the target name; is the IP address and
port number; and is the name of the iface created in step 1.
Example
iscsiadm -m iface -o new -I iface0
iscsiadm -m iface -I iface0 --op=update -n iface.hwaddress -v 00:0F:1F:62:2B:BF
iscsiadm -m iface -I iface0 --op=update -n iface.transport_name -v be2iscsi
service open-iscsi restart
iscsiadm -m discovery -t st -p 20.0.0.107:3260 -I iface0 -P 1
iscsiadm -m iface -I iface0 --op=update -n iface.hwaddress -v 00:0F:1F:92:6B:BF
iscsiadm -m iface -I iface0 -o update -n iface.ipaddress -v 20.0.0.107
iscsiadm -m node -T iqn.tgt0 -p 20.0.0.107:3260 -I iface0 -l fdisk -l
iscsiadm -m node -T iqn.tgt0 -p 20.0.0.107:3260 -I iface0 –u
iSNS Discovery Using iscsiadm
iSNS discovery uses a standard NIC interface. The default interface is the
TCP_interface.
localhost:~ # iscsiadm -m iface
default tcp,,,,
iser iser,,,,