Dell Emulex Family of Adapters - Manual (Page 210)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OneConnect Adapters
210
Firmware Tab Buttons (Not available in read-only mode.)

Download Firmware – Click to update firmware on the selected adapter. See
“Updating Adapter Firmware” on page 249 for more information.

Diagnostic Dump – Click to create a diagnostic dump for the selected adapter.
See “Creating Diagnostic Dumps” on page 282 for more information.
Viewing OneConnect Physical Port Information
The Physical Port Info tab contains a general summarization of the PCI functions under
that physical port and the current physical port status.
OneConnect OCe11100 series adapters also display additional Physical Port Status
information including interface type, configured speed and DAC cable length. You can
set the port speed and DAC cable length. See “Setting Port Speed and DAC Cable
Length (OneConnect OCe11102 and OCe14000-Series Adapters Only)” on page 211 for
more information.
The Physical Port Info tab also allows you to enable or disable the physical port. See
“Configuring iSCSI Port Initiator Login Options” on page 178 for more information.
To view physical port information:
1. Select Host view.
2. Select a OneConnect adapter port in the discovery-tree.
3. Select the Physical Port Info tab.
Figure 8-66 Physical Port Info Tab (OCe11102 Adapter Port Selected)
Enabling and Disabling OneConnect Physical Ports
Using the Physical Port Info tab you can enable or disable the physical port. When you
disable a physical port, you disable all functions, such as iSCSI and NIC, for the port.
Disabled ports appear in the discovery-tree as a black port icon.