Dell Emulex Family of Adapters - Manual (Page 716)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
iSCSI Error and Event Log
716
0x12 Error Unrecoverable error detected.
UE Low: A
UE High: B
FW Line: C. An unrecoverable error was detected by the
iSCSI driver.
This may be caused by hardware errors or by
unhandled exceptions in the hardware or
firmware.
0x13 Error Hardware initialization failed,
failing driver load The iSCSI driver detected a failure in the
hardware during initialization.
This failure indicates that the hardware has not
been initialized or is malfunctioning. This may
also indicate that the firmware is not running
correctly.
0x14 Warning Failed to retrieve scatter
gather list for an SRB, an IO
has failed. The iSCSI driver failed an I/O request because it
failed to retrieve a scatter/gather list from the
Storport driver.
This failure occurred because of a failed
memory allocation in the operating system.
Check low memory conditions.
0x15 Error ACIT library table
initialization failed. An internal API failed in the iSCSI driver during
initialization.
This failure may indicate a low memory
condition.
0x16 Error An ACIT API failed. An internal API failed in the iSCSI driver during
initialization.
This failure may indicate a low memory
condition.
0x17 Error Unsupported hardware, failing
driver load. Driver loading failed because the PCI Vendor ID
and Device ID are not supported.
Check the UCNA configuration.
0x18 Error Memory could not be
allocated, failing driver load. This failure occurred because of a failed
memory allocation in the driver.
This failure may indicate a low memory
condition
0x19 Warning WMI driver error, code A. The iSCSI driver failed a WMI IOCTL request
from the port driver. The event log entry
includes the WMI request code in error.
An operation attempted from the Microsoft WMI
application resulted in an error. Check the
operation being attempted for errors.
0x1a Warning WMI IOCTL error, code A. The iSCSI driver failed a WMI IOCTL request
from the port driver because the request was
failed by the ARM firmware. The event log
entry includes the request code in error.
An operation attempted from the Microsoft WMI
application resulted in an error. Check the
operation being attempted for errors.
Table A-15 iSCSI Error Log Entries on Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows
Server 2012, and Windows Server 2012 R2 (Continued)
Message ID Severity Message Recommended Resolution