Dell Emulex Family of Adapters - Manual (Page 391)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
391
ShowTarget
This command shows the properties for a specified target. If you do not specify the
iSCSI target name , all targets and their associated properties
return. If you specify in place of the , all targets
are refreshed before returning the information. If you do not provide a
or value, only the targets from the last refresh are
displayed.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ShowTarget [ | refreshtargets]
Note: Only one command option can be specified with this command. That is, you can
only specify either or .
Parameters
ShowTargetPortal
This command shows the properties for a specified SendTarget Portal. If the
and are not specified, all SendTarget Portals and their associated
properties return.
Supported By
Linux, Solaris, and Windows
Syntax
ShowTargetPortal [ ]
Parameters
MAC_Address
The MAC address of an iSCSI port.
iscsi_target_name
The target’s iSCSI name enclosed in quotes (string length:
11–255).
refreshtargets
Refresh all targets before displaying the information.
MAC_Address
The MAC address of an iSCSI port.
Target_IP
IP address of the target portal. You can specify an IPv4 or IPv6
Target IP address.
Port
Port number of the target portal.