Dell Emulex Family of Adapters - Manual (Page 576)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
2. Installation
Removing Emulex Driver Kits and Drivers
576
2. Select one of the following in the program list and click the Uninstall icon in the
tool bar above the program list. If you have User Access Control enabled, click
Continue when asked for permission.

Emulex FC kit-2.xx.xxx

Emulex/FCoE kit-2.xx.xxx

Emulex/NIC 4.xx.xxx

Emulex/iSCSI kit-4.xx.xxx
3. Click Yes when prompted to remove the kit. After the kit is removed from the
system, click OK.
Server Core System
To uninstall a driver kit on a Server Core system:
1. From the system prompt, navigate to the Program Files folder.
2. Navigate to Emulex\AutoPilot Installer.
3. Run the following batch files:

Uninstall_fc_kit.bat

Uninstall_cna_kit.bat

Uninstall_nic_kit.bat

Uninstall_iscsi_kit.bat
The driver files are removed from the system.
On all platforms, the reports folder in the “Emulex\AutoPilot Installer” folder is not
removed, so you can still view installation history and the drivers that have been
installed on the system. You can delete the reports folder at any time.
Windows Server 2012
To uninstall a driver kit on a Windows Server 2012 system:
1. Select Start>Control Panel.
2. From the Control Panel, select Programs>Uninstall a Program.
3. Select one of the following in the program list and click the Uninstall icon in the
tool bar above the program list. If you have User Access Control enabled, click
Continue when asked for permission.

Emulex FC kit-2.xx.xxx

Emulex/FCoE kit-2.xx.xxx

Emulex/NIC 4.xx.xxx

Emulex/iSCSI kit-4.xx.xxx
4. Click Yes when prompted to remove the kit. When the kit is removed from the
system, click OK.
Server Core System
To uninstall a driver kit on a Server Core system:
1. From the system prompt, navigate to the Program Files folder.