Dell Emulex Family of Adapters - Manual (Page 1161)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
1. Introduction
1161
Channel over Ethernet (FCoE) + network interface card (NIC) mode, it functions as a
UCNA.
OneCommand Manager for VMware vCenter supports Emulex OCe14101 and
OCe14102 UCNAs. The features available in OneCommand Manager for VMware
vCenter are determined by the version of Emulex CIM provider installed.
The following table lists the Emulex OneCommand Manager application support
provided by each Emulex CIM provider package and the individual FC and UCNA
providers in each package. The Emulex CIM Provider packages can be downloaded
from the Emulex website.
Note: In Table 1-1, the following conventions apply:
 
the feature is supported on the particular Emulex CIM Provider version and
OneCommand Manager for VMWare vCenter.

N/A the feature is not applicable.

* the feature is supported for LPe16000-series FC adapters only.

** the feature is supported for LPe16000-series FC and CNA adapters.
Table 1-1 Support Provided by Emulex CIM Provider Versions
Emulex OneCommand
Manager Application
Features
ELX CIM
Provider
Package
v10.0
ELX CIM
Provider
Package
v10.2
OneCommand
Manager for
VMware
vCenter
v10.0
OneCommand
Manager for
VMware
vCenter
v 10.2 UCNA FC UCNA FC
Discover virtual ports
connected to an FC or FCoE
port      
View virtual port information
in a cluster (host-centric
mode) N/A N/A N/A N/A  
Discover hosts, adapters (FC,
FCoE, NIC and iSCSI), targets,
and LUNs for selected ESXi
hosts      
Discover hosts and adapters
(FC and FCoE) for selected
ESXi fabrics      
Display firmware revision      
Display boot code version      
Update firmware and FC boot
code on a single adapter      
Update firmware and FC boot
code on a per-fabric basis N/A N/A N/A N/A  
Change WWPN or WWN for FC
adapters      