Dell Emulex Family of Adapters User Manual

Page 718

Emulex Drivers for Windows User Manual

P010077-01A Rev. A

Appendix A. Error and Event Log Information

iSCSI Error and Event Log

718

0x24

Error

Device is not supported on
Windows 7 Operating System,
failing driver load.

The iSCSI adapter family is not supported on
the Windows 7 client operating systems.

0x25

Info

Interrupt Redirection
capability is not supported by
this hardware.

N/A

0x26

Warning

Logical link on the
OneConnect Port is down,
traffic is disallowed on this
function.

The iSCSI function may have been disabled in
the PXESelect application. If you disabled it
intentionally, you can ignore this message.

0x27

Error

Firmware returned invalid
data in its configuration. iSCSI
login and offload are disabled.

Reload the firmware.

0x28

Warning

Error Recovery is not being
attempted. Adapter is no
longer functional.

A UE has occurred, but UE recovery is not
enabled. A system reboot is required to make
the adapter operational again.

0x2b

Informational

The storage device is
operating in Gen mode
and installed in a x PCIe
slot.

Informational message that provides the slot
capabilities where the iSCSI adapter is
installed.

0x2c

Error

The firmware appears
unresponsive; Unrecoverable
Error.

The adapter is no longer functional. A system
reboot is required to make the adapter
operational again.

0x2d

Informational

Reporting X of the total Y
sessions logged in by
firmware.

Informational event to indicate that not all
targets logged in by the firmware were
reported as available to the operating system.
If the total number of targets logged by the
firmware is over the specified limits, this error
can be ignored.

0x2f

Warning

Solicited command was
invalidated internally due to a
Data Digest error.