Dell Emulex Family of Adapters - Manual (Page 1174)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
2. Installing and Uninstalling OneCommand Manager for VMware vCenter Components
Registering and Unregistering OneCommand Manager for VMware vCenter
1174
Figure 2-8 Register/Unregister Dialog Box
2. Enter the following details of the vCenter Server:

vCenter Server Name – The IP address of the vCenter Server.

vCenter Server HTTPS Port – The HTTPS port number of the vCenter Server.

The vCenter Server HTTPS port is by default 443. You can change this value if
you have configured a different HTTPS port while installing the vCenter.

Username – The user with required privileges.

Password – The user password.
3. Do one of the following:

Click Register to register OneCommand Manager for VMware vCenter with a
new vCenter Server.
-or-

Click Unregister to unregister an existing OneCommand Manager for VMware
vCenter with a vCenter Server.
Notes:

If you change the host name of the machine hosting the plug-in server, you
should re-install the plug-in server and re-register.

If the vCenter server is already registered with another instance of
OneCommand Manager for VMware server, it is replaced with this server
instance.
4. When the operation is successful, a message is displayed. Click OK.
5. Close the browser window.
Note: OneCommand Manager for VMware vCenter can be registered with more than
one vCenter Server.