Dell Emulex Family of Adapters - Manual (Page 769)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
3. Using the OneCommand NIC Teaming and VLAN Manager
Changing the General Settings
769
Changing the General Settings
The default global reactivation delay is the amount of seconds that an adapter must
wait to carry traffic before it is allowed to rejoin its team. The reactivation delay
defaults to 30 seconds and prevents jittering while the adapter stabilizes.
If you change the default global reactivation delay value using the General Settings
dialog box, all new teams that you create will use the new value. Teams created with
non-default reactivation delay values are not affected.
Note: Setting a reactivation delay value while creating a team (on the Create Team
tab) overrides any default global reactivation delay value set or changed in the
General Settings dialog box.
To change the global reactivation delay for future teams:
1. From the menu bar, select Tools>General Settings. The General Settings dialog box
is displayed.
Figure 3-11 General Settings Dialog Box
2. Change the global reactivation delay value. The acceptable range is 1–200.
3. Choose to enable or disable auto-refresh. Clear Enable Auto refresh to disable it. If
Auto refresh is selected, the OneCommand NIC Teaming and VLAN Manager
refreshes itself. By default, auto-refresh is enabled and set to 90 seconds. The
acceptable range is 30–300.
4. Click Set.