Dell Emulex Family of Adapters - Manual (Page 882)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
882
0136: PLOGI completes to NPort completion
A PLOGI has completed for which there is no NDLP.
Data: (1) ulpStatus (2) ulpWord[4]
Severity: Error
Log:
LOG_ELS
Action: None required.
0137: No retry ELS command to remote
Data: (1) ulpStatus (2) ulpWord[4]
Severity: Error
Log:
LOG_ELS
Action: None required.
0138: ELS rsp: Cannot issue reg_login for
REG_LOGIN mailbox command failed.
Data: (1) nlp_DID (2) nlp_state (3) nlp_flag (4) nlp_rpi
Severity: Error
Log:
LOG_ELS
Action: None required.
0139: Ignoring ELS cmd tag completion Data
This ELS command was aborted.
Data: (1) ulpStatus (2) ulpWord[4] (3) ulpTimeout
Severity: Error
Log:
LOG_ELS
Action: None required.
0140: PLOGI Reject: invalid name
Invalid node WWN provided.
Data: None
Severity: Error
Log:
LOG_ELS
Action: None required.
0141: PLOGI Reject: invalid pname
Invalid port WWN provided.
Data: None
Severity: Error
Log:
LOG_ELS
Action: None required.
0142: PLOGI RSP: Invalid WWN
The PLOGI sent to the port by a remote port had an invalid WWN.
Data: None
Severity: Error
Log:
LOG_ELS
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)