Dell Emulex Family of Adapters - Manual (Page 800)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
5. OneCommand NIC Teaming Manager Command Line Interface
The Command Reference
800
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe create team failover
:fbenabled myteam nic5 nic6
Successfully created team: myteam
WARNING: The MTU sizes of some of the team member adapters are not
matching. As a result, the team will use the least MTU. Also, TOE will
be disabled.
Deleting a Team
Caution: Removing a team may take several minutes. Prematurely cancelling this
operation may result in partial removal of a team or VLAN, which may lead
to future teaming issues including system instability.
Note: Do not remove a team or VLAN while they are carrying traffic. If you do,
unpredictable results will occur.
Note: Adapters, teams and VLANs that have been disabled in Network Connections
or Device Manager cannot be managed by the NIC Teaming Manager and may
not be visible to the NIC Teaming Manager. Make sure that any affected
adapters, teams and VLANs are enabled before making any NIC Teaming
configuration changes.
Note: For a complete list of notes for deleting a team, see “Creating, Configuring, and
Removing Teams” on page 764.
Syntax
delete team <team-id>
Parameters
Description
This command deletes a team from the system and deletes any VLANs assigned to the
team.
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe delete team mylbteam
Successfully deleted team: mylbteam
Adding an Adapter to a Team
Syntax
add adapter <team-id> <Adapter-id>
team-id
Team to be deleted.