Dell Emulex Family of Adapters - Manual (Page 1445)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
6. EFIBoot
Enable or Disable the BIOS
1445
2. Select 1. Enable or Disable BIOS and press . The current BIOS status is
displayed (Figure 6-7).
Figure 6-7 BIOS Status Screen
3. If the current status is disabled, select Enabled and press . The status
changes to enabled (Figure 6-8).
Figure 6-8 BIOS Enabled Screen
You can configure EFIBoot systems for up to eight boot devices. Configure one boot
device at a time. Press to return to the EFI utility menu.