Dell Emulex Family of Adapters - Manual (Page 1474)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
7. Configure EFIBoot via UEFI HII (Human Interface Infrastructure) in a UEFI 2.1 System
Configure EFIBoot in UEFI/HII
1474
Configure EFIBoot in UEFI/HII
The EFI utility has numerous options that can be modified to provide for different
behavior. Use the EFI utility to do the following tasks:

Set boot from SAN

Scan for fibre devices

Add and delete boot devices

Change boot device order

Configure HBA and boot parameters

Set adapters to their default settings

Display adapter information
Note: Changes made to parameters common to EFI and x86 drivers are changed in
both driver configuration utilities.
Set Boot from SAN
To set boot from SAN:
1. From the Adapter Selection screen, select the adapter whose boot from SAN setting
you want to change and press <Enter>.
2. From the Main menu, select Boot from SAN. The current boot setting is displayed.
Press . A Disable/Enable menu appears.
Figure 7-3 Main Menu, Boot from SAN Options Menu