Dell Emulex Family of Adapters - Manual (Page 343)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Channel Management Commands
343
Parameters
Example
Multichannel Disabled
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: None
Configured mode: None
Available modes: UMC
Multichannel Enabled - UMC, NIC Only
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: UMC
Configured mode: UMC
Available modes: UMC
Func# Type MAC Address LPVID Min BW Max BW
----- ----- ----------------- ----- ------ ------
0 NIC 00-00-c9-12-34-56 2 25 50
1 NIC 00-00-c9-12-34-57 3 25 50
2 NIC 00-00-c9-12-34-58 4 25 50
3 NIC 00-00-c9-12-34-59 5 50 75
Multichannel Enabled - UMC, with Storage
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: UMC
Configured mode: UMC
Available modes: UMC
Func# Type MAC Address LPVID Min BW Max BW
----- ----- ----------------- ----- ------ ------
0 NIC 00-00-c9-12-34-56 2 25 50
1 FCoE n/a n/a 40 100
2 NIC 00-00-c9-12-34-58 4 25 50
3 NIC 00-00-c9-12-34-59 5 10 20
Multichannel Disabled - IBM
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: None
MAC
MAC address of any NIC or iSCSI function on an adapter port.
WWPN
WWPN of an FCoE function on an adapter port.