Dell Emulex Family of Adapters - Manual (Page 208)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OneConnect Adapters
208
Figure 8-64 OneConnect OCe10102 and OCe11102 Adapter Information Tab
To change the personality of OCe10102 and OCe11102 adapters:
1. From the discovery-tree, select the OCe10102 or OCe11102 adapter whose
personality you want to change. The Adapter Information tab is displayed.
2. From the Personality area of the Adapter Information tab, select the personality
type you want and click Apply.
Note: If the adapter does not support personalities, personality controls are not
displayed. Also, if the adapter does not support a particular personality
type that control is disabled.
3. Reboot the host for the personality change to take effect.
Viewing OneConnect Firmware Information
Unlike LightPulse adapters, OneConnect adapter firmware is maintained on an
adapter-specific instead of port-specific basis. Use this tab to download firmware and
create diagnostic dumps for the selected adapter.
To view OneConnect firmware information:
1. Select Host view.
Note: iSCSI and NIC-Only adapters do not appear in Fabric view.
2. Select a OneConnect adapter in the discovery-tree.