Dell Emulex Family of Adapters - Manual (Page 403)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Miscellaneous Commands
403
ListHBAs
This command shows a list of the manageable Emulex adapters found by local and
remote out-of-band (TCP/IP) discovery. For a NIC-only or iSCSI adapter, the MAC
address is displayed rather than the port WWN. The node WWN and fabric WWN are
not displayed. The type of information listed may vary according to the adapter model.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ListHBAs [local] [m=model] [pt=type] [down]
Parameters
RemoveHost
This command removes a host from the hosts file use for TCP/IP management in the
OneCommand Manager application GUI. The can be an IP address,
using the IPv4 or IPv6 format, or a host name.
Supported By
Linux, Solaris, and Windows
Syntax
For the RM interface:
hbacmd RemoveHost host_address
For VMware ESXi using the CIM interface:
hbacmd m=cim RemoveHost
Note: The “h=” option (for specifying an optional IP address or host name) after
“hbacmd” is not available for the RemoveHost command.
local
Only displays local adapters.
m=model
Model filter. Append * to the end of the model name for a wildcard match.
For example:
LP9*
pt=type
The port type filter. Valid types are NIC, iSCSI, FC, and FCoE.
down
Displays only the NIC functions of inoperative OneConnect and LPe16202
adapters on the local system.