Dell Emulex Family of Adapters - Manual (Page 1272)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
OCe14100–Series Adapters
1272
Configured Groups

Group ID – The Priority Group ID.

Priority Membership – The configured priority membership grouping.

Bandwidth% – The configured bandwidth value for the different Priority
Groups.
Configure DCB Dialog Box Buttons

Defaults – Click to return parameters to default DCB settings.

Configuration Rules – Click to view a window that lists the rules for
configuring priorities. You must observe these rules when configuring
Priority Groups for adapter ports. Configuration rules are displayed based
on the type of adapter ports you are configuring.

OK – Click to apply and save your changes.

Cancel – Click to discard any changes you made.
FCoE and iSCSI Configuration Rules

One and only one priority is configured for the priority.

You can select a maximum of two PFC priorities and one of them must
match the priority.

The PFC Priority Group to which the priority is assigned must contain no
other priorities.

The additional PFC priority must be assigned to a Priority Group which has
no other priority.

Bandwidths of all the Priority Groups must total 100%.
NIC Configuration Rules

One and only one priority is configured for the priority.

The PFC priority must be assigned to a Priority Group which has no other
priorities.

Bandwidths of all the Priority Groups must total 100%.
OCe14100–Series Adapters
Viewing OCe14100–Series Adapter Configuration
Information
The Adapter Configuration tab contains current configuration information associated
for the selected adapter.
To view configuration information:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.