Serverattributes – Dell Emulex Family of Adapters User Manual
Page 1369
OCM for VMware vCenter Version 10.2 User Manual
P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1369
Syntax
elxvcpcmd.exe v=
h=
Description
This command saves the specified FC/FCoE adapter’s driver parameters to a file on an
ESXi host. The resulting file contains a list of driver parameter definitions in ASCII file
format with definitions delimited by a comma. Each definition is of the form:
The command saves either the values of the global set, or those specific to the adapter
in the Emulex Repository directory.
Parameters
serverattributes
Syntax
elxvcpcmd.exe v=
h=
Description
This command is used to retrieve basic information about the host such as the OS
version and CIM provider version.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
FileName
The name of the local .dpv file.
Flag
Valid types are:
G = Make change global (all adapters on this host)
N = Make change non-global (adapter-specific)