Dell Emulex Family of Adapters - Manual (Page 1055)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1055
elx_mes0338: IOCB wait timeout error - no wake response Data
DESCRIPTION: Driver issued I/O did not get a wake signal in polling mode.
DATA: (1) wait time (2) wake value
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes0340: Adapter temperature is OK now
DESCRIPTION: Adapter temperature has reverted to normal range.
DATA: Temperature in Celsius
ACTION: No action needed, informational.
elx_mes0341: Ring Cannot find buffer for an unsolicited iocb tag
DESCRIPTION: There are no more pre-allocated buffers available to handle unsolicited
buffers.
DATA: None
ACTION: Ensure this port is not being managed by multiple ports.
elx_mes0342: Ring Cannot find buffer for an unsolicited iocb tag
DESCRIPTION: This is a multiple IOCB unsolicited command and sufficient buffer
space cannot be allocated for it.
DATA: None
ACTION: None required.
elx_mes0343: Ring Cannot find buffer for an unsolicited iocb tag
DESCRIPTION: There are no more pre-allocated buffers available to handle unsolicited
buffers.
DATA: None
ACTION: None required.
elx_mes0344: Ring Cannot find buffer for an unsolicited iocb tag
DESCRIPTION: There are no more pre-allocated buffers available to handle unsolicited
buffers.
DATA: None
ACTION: None required.