Dell Emulex Family of Adapters - Manual (Page 897)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
897
0343: Ring Cannot find buffer for an unsolicited iocb tag
There are no more pre-allocated buffers available to handle unsolicited buffers.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0344: Ring Cannot find buffer for an unsolicited iocb tag
There are no more pre-allocated buffers available to handle unsolicited buffers.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0345: Resetting board due to mailbox timeout iocb. tag 0x%x
A mailbox command failed to complete. The driver is resetting the port.
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: If the mailbox command fails again, set the lpfc_log_verbose to LOG_MBOX and retry.
0346: Ring handler: unexpected ASYNC_STATUS evt_code
W0 W1 W2 W3 W4 W5 W6
W6> W7 W8 W9 W10 W11
The HBA received an asynchronous event that was not a temperature event.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0347: Adapter is very hot, please take corrective action
Adapter temperature is above normal range.
Data: Temperature in Celsius
Severity: Error
Log:
LOG_TEMP verbose
Action: Shutdown and remove the HBA. Contact Technical Support.
0348: NameServer login: node freed
The enable mode failed to free up the NameServer login.
Data: None
Severity: Error
Log:
LOG_ELSI
Action: None required.
0349: rc should be MBX_SUCCESS
The next mailbox command on the mailbox queue has failed.
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)