Dell Emulex Family of Adapters - Manual (Page 945)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
945
2516: DEL FCF of default FCF Index failed mbx status , status
add_status
The mailbox command to delete the FCF record has failed.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2517: Unregister FCFI command failed status %d, mbxStatus x%x", rc,
bf_get(lpfc_mqe_status, &mbox->u.mqe)
The driver was unable to unregister the FCFI from the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2518: Requested to send 0 NOP mailbox cmd
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2519: Unable to allocate memory for NOP mailbox command
Memory allocation for this mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2520: NOP mailbox command failed status x%x add_status x%x mbx status x%x,
shdr_status, shdr_add_status, rc.
The NOP mailbox command has failed.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2521: READ_FCF_RECORD mailbox failed with status add_status
, mbx
The READ_FCF_RECORD mailbox command failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2523: Allocated DMA memory size () is less than the requested DMA
memory size ()
The ADD_FCF_RECORD mailbox command failed to retrieve the length required from the firmware.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)