Dell Emulex Family of Adapters - Manual (Page 197)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OneConnect Adapters
197
License Features Area
Note: Not available on OneConnect OCe11101-EM/EX, OCe11102-EM/EX or
OCe14000-series adapters.

Show License Features button – Click to show available licenses. See “Showing
and Installing Licenses for OneConnect OCe10102 and OCe11102 Adapters” on
page 204 for more information.

Install License Features button – Click to install licenses. See “Showing and
Installing Licenses for OneConnect OCe10102 and OCe11102 Adapters” on
page 204 for more information.
Channel Management Area
Note: Not available on OneConnect OCe11101-EM/EX or OCe11102-EM/EX
adapters.
Note: Channel management for OCe14000-series adapters is done using the Adapter
Configuration tab.

Type – The type of channel management in use.

Management Type After Reboot – A dropdown box to select a channel
management type or to disable channel management.
Note: A reboot is required for the change to take effect.
Viewing Channel Management Information
The Channel Management tab is displayed when an adapter port is selected in the
discovery-tree and Channel Management is enabled on the Adapter Information tab.
The Channel Management tab shows the channel management type and the properties
for the particular channel management type.
Note: If Channel Management was enabled on the Adapter Information tab without
rebooting, the Channel Management tab is not displayed.
To view general channel management information:
1. From the discovery-tree, select the adapter port whose channel information you
want to view.
2. Select the Channel Management tab.
Note: Channel Management must be enabled on the Adapter Information tab for
the Channel Management tab to appear.