Dell Emulex Family of Adapters - Manual (Page 1639)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1639
Selecting the Custom Personality
The Custom personality allows you to select the protocol type for each function. iSCSI
and FCoE personalities may only be enabled on one function per adapter port.
Note: There cannot be two iSCSI functions and two FCoE functions on a single port.
To select the Custom personality:
1. From the Personality Selection screen (Figure 11-7), select Custom and press
. The Custom Personality Selection screen appears.
Figure 11-9 Custom Personality Selection Screen
2. Select the desired personality for the appropriate function from the pop-up menu
and press .
3. Select Save and press .
Note: Additional configuration changes may be made after changing the Personality
setting; however, a reboot is required before the new Personality setting will
take effect.