Dell Emulex Family of Adapters - Manual (Page 797)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
5. OneCommand NIC Teaming Manager Command Line Interface
The Command Reference
797
Parameters
Description
This command shows details about a team or an adapter. Optionally, to show
information about a VLAN, you must first specify an adapter or team, and then specify
the VLAN ID. You may use a numeric value or a string to identify the VLAN.
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe show “SLOT 2”
Device Manager Name: Emulex OneConnect OCe11102[R]-I 2-port 10GbE SFP+
PCIe iSCSI CNA
Network Conn. Device Name: SLOT 2
Connection Status: connected
IPv4: 172.20.204.114
IPv6: fe80::40fa:fb7b:777e:100f
Adapter type: Adapter Unbound
MAC Address: Link Speed: 10.0 Gbps
Packet Sent: 4592 Packets Received: 39229154
Showing VLAN IDs
Syntax
show vlans <team-id>
Parameters
Description
This command shows a listing of VLAN IDs that are currently in use and those that are
available for use.
Example
C:\Program Files\Emulex\NIC Teaming>OCTeamCmd.exe show vlans myteam
team-id
Team name.
adapter-id
Adapter alias assigned by OCTeamCMD.
network-connection-name
This name is not stored by OCTeamCMD. This name is
maintained by Windows.
vlan-id
An optional parameter that specifies the number used
as the VLAN tag.
adapter id
Adapter alias assigned by OCTeamCMD.
team-id
The name assigned to a team when it is created.