Dell Emulex Family of Adapters - Manual (Page 1601)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
9. Configuring and Managing the iSCSI Initiator with the iSCSISelect Utility
Viewing the Controller Properties
1601
Viewing the Controller Properties
The Controller Properties screen displays controller information and allows you to
configure controller options, such as boot support, IPv4 boot target discovery using
DHCP, and MPIO port configuration.
To view the controller properties:
1. From the Controller Configuration menu (Figure 9-3), select Controller Properties
and press . The Controller Properties screen is displayed.
Figure 9-4 Controller Properties Screen
Enabling Boot Support
Boot support is provided for each port or function. If boot support is enabled, you can
boot from the specified function. If boot support is disabled, you will not be able to boot
from the function.
To enable boot support:
1. From the Controller Properties screen (Figure 9-4), select Boot Support and press
. A pop-up menu appears.
Figure 9-5 Controller Properties Screen with Boot Support Pop-up Menu
2. Select Enabled or Disabled and press .
3. To save your changes, select Save and press .