Applying power, Applying power 3, Figure 2-6 – Dell Emulex Family of Adapters User Manual

Page 1813: Figure 2-6)

Text mode
Original mode

Emulex Adapter Installation Manual

P010288-01A Rev. A

2. Installation

Applying Power

1813

Figure 2-6 Connecting a DAC Cable

2. After the appropriate cable is connected to the adapter, connect the other end of the

cable to a suitable device, such as a Top of Rack (TOR) EE switch.

After the device is connected to the adapter, you are ready to apply power to the

computer.

Applying Power

To apply power:
1. Verify that the adapter is securely installed in the computer.
2. Verify that the correct device is attached.
3. Plug in and turn on the computer.
4. Observe the boot banner for Power On Self Test (POST) results.