Dell Emulex Family of Adapters - Manual (Page 366)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Dump Commands
366
DeleteDumpFiles
This command deletes all diagnostic dump files for the adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
DeleteDumpFiles
Parameters
Dump
This command creates a diagnostic dump file in the HbaCmd dump file directory.
Note: In some cases, a core dump can be performed on an inoperative OneConnect
adapter. To view inoperable adapters on the local host, use the “ListHBAs
down” command. See “ListHBAs” on page 403.
Note: For OneConnect adapters, if the “core” optional parameter is not specified, an
Enhanced FAT Dump is performed by default.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
Dump [core [Options]]
Parameters
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
core
Perform a core dump on a OneConnect adapter (local host only).
Options
For available core dump options, contact Emulex technical support.