Dell Emulex Family of Adapters - Manual (Page 529)

OneCapture™ User Manual P010073-01A Rev. A
2. Running OneCapture
Silent Mode Execution
529
OneCapture_ESX.exe /silent /type=basic /dir="C:\Capture\BE3" /connect
[ip address] /username [username] /password [password] /skip_cim
Available parameters:
/connect [ip address]
Sets the remote VMware host IP address to which to connect.
/username [username]
Sets the remote VMware host username to which to connect.
/password [password]
Sets the remote VMware host password to which to connect.
/skip_cim
This option forces OneCapture to not check whether the CIM provider is installed on
the remote VMware host.