Dell Emulex Family of Adapters - Manual (Page 372)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
372
iSCSI Commands
The commands in this section support the iSCSI interface in the OCM CLI.
Note: iSCSI commands are supported only on OneConnect iSCSI ports.
Note: Only OCe14000-series adapters support IPv6 addresses.
The MAC address of the iSCSI port must be passed to each command
as the first argument.
Some commands require values to be set in a format similar to: “option_name=value”.
Type the full option name or the abbreviated option name (shown in Table 5-2, Option
Names) and enter the value. The abbreviations are not case sensitive.
AddARPTableEntry
This command adds an ARP table entry.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
AddARPTableEntry
Table 5-2 Option Names
Option Name Abbreviation Example
Auth au
au=1
DataDigest dd
dd=1
DHCP dh
dh=1
HeaderDigest hd
hd=1
ImmediateData id
id=1
Initiator_Alias ia
ia=”initiator_alias”
Initiator_Name in
in=”initiator_name”
Priority pr
pr=1
VLAN_ENABLED ve
ve=1
VLAN_ID vi
vi=1