Dell Emulex Family of Adapters - Manual (Page 1688)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1688
Enabling iSNS Discovery
This option enables or disables iSNS discovery. iSNS targets are only discovered when
this option is enabled.
To enable or disable iSNS discovery:
1. From the iSNS Configuration screen, select iSNS Discovery Mode and press
.
Figure 12-24 iSNS Discovery Mode Screen
2. Select either Enable or Disable and press .
3. Select Save Changes and press to save the current settings.
Enabling iSNS Server Discovery via DHCP
This option discovers iSNS servers configured on the network using DHCP.
Note: If you leave iSNS Server Discovery via DHCP disabled (default), you must
manually configure the iSNS server.
To enable or disable iSNS server discovery using DHCP:
1. From the iSNS Configuration screen (Figure 12-25), select iSNS Server Discovery
via DHCP and press .