Dell Emulex Family of Adapters - Manual (Page 116)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
FC/FCoE
116
FC Port Information Field Definitions
Port Attributes Area Field Definitions

Port WWN – The Port World Wide Name of the adapter.

Node WWN – The Node World Wide Name of the adapter.

Fabric Name or Host Name – The Fabric Name field is displayed in Host view.
This is a 64-bit worldwide unique identifier assigned to the fabric. The Host
Name is displayed in Fabric view. The host name is the name of the host
containing the adapter. (Not supported on VMware ESXi servers being
managed through the CIM interface.)

Boot Version – The version of boot code installed on the selected adapter port. If
the boot code is disabled, the field displays “Disabled”.

Port FC ID – The FC ID for the selected adapter port.

PCI Function – The PCI function number assigned by the system.

PCI Bus number – The PCI BUS number assigned to the FC function.

Driver Version – The version of the driver installed for the adapter.

Driver Name – The executable file image name for the driver as it appears in the
Emulex driver download package.

Firmware Version – The version of Emulex firmware currently active on the
adapter port.

Discovered Ports – The number of mapped and unmapped ports found during
discovery by the Emulex adapter driver. The mapped ports are targets and the
unmapped ports are non-targets such as switches or adapters.

Port Type – The FC type of the selected adapter’s port. (Not available if the port
link is down.)

OS Device Name – The platform-specific name by which the selected adapter is
known to the operating system. (Not supported on VMware ESXi servers being
managed through the CIM interface.)

Symbolic Node Name – The FC name used to register the driver with the name
server.

Supported Class of Service – A frame delivery scheme exhibiting a set of
delivery characteristics and attributes. There are three classes of service.

Class 1 provides a dedicated connection between a pair of ports with
confirmed delivery or notification of non-delivery.

Class 2 provides a frame switched service with confirmed delivery or
notification of non-delivery.

Class 3 provides a frame switched service similar to Class 2 but without
notification of frame delivery or non-delivery.

Supported FC4 Types – A 256-bit (8-word) map of the FC-4 protocol types
supported by the port containing the selected adapter.
Port Status Area Field Definitions

Link Status – The status of the link on the selected adapter port.