Dell Emulex Family of Adapters - Manual (Page 475)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
3. Adapter Management Utility Command Line Interface
Process FC HBAs Only (/fc)
475

If the update versions are higher than the currently installed versions on the
adapter, the Adapter Management Utility provides a download preview for
each adapter that can be updated.

If multiple update versions of firmware or boot code are found for an adapter,
the Adapter Management Utility provides a download preview using the most
recent versions.
./elxflash /preview
– Previews an upgrade of firmware or boot code using the
fwmatrix.txt file.

For each installed and supported adapter, the current firmware and boot code
versions are compared with the versions specified in fwmatrix.txt.

If the update versions in fwmatrix.txt are more recent than the currently
installed versions, the Adapter Management Utility provides a download
preview of firmware or boot code for each adapter that can be updated.
FC Adapter Download Summary
HBA=, Port Type=, WWN=,
Update=, Image=, New=,
Old=, Status=Preview
FCoE Adapter Download Summary
HBA=, Port Type=, WWN=,
Update=Firmware, Image=, New=, Old=,
Status=Preview
iSCSI and NIC-only Adapter Download Summary
HBA=, Port Type=, MAC=,
Update=Firmware, Image=, New=, Old=,
Status=Preview
Process FC HBAs Only (/fc)
Usage:
/fc
The process FC HBAs only switch causes elxflash to act only on FC HBAs.
Example usage:
./elxflash /q /fc
- Only FC HBAs are displayed for a query.
./elxflash /auto /up /fc
- Applies auto update only to FC HBAs.
When doing a firmware or boot code update and the /fc switch is used, only FC HBAs
are updated; UCNAs are not displayed.