Dell Emulex Family of Adapters - Manual (Page 1779)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1779
Device Level Configuration Page
This page displays the global device level parameters and allows you to configure
them.
Figure F-13 Device Level Configuration Page
Table F-12 Device Level Configuration Page Menu Options
Menu Option Description and Available Settings
Flow Control Setting Configure the type of flow control used by the adapter.
Note: Ethernet flow control cannot be changed when priority flow
control is enabled on the switch ports and enabled in the
firmware (through the OneCommand Manager application).
Available settings include:
• Auto
• TX: Send Pause on RX Overflow
• RX: Throttle TX on Pause Received
• TX / RX Flow Control
NParEP Mode Enable more than eight partitions on the device. It must not be
enabled if the system and operating system do not support devices
with more than eight PCI PFs.
Available settings include:
• Enabled
• Disabled
Partitioning Mode The current partitioning mode, which is always Switch Independent
Partitioning.