Dell Emulex Family of Adapters - Manual (Page 806)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
5. OneCommand NIC Teaming Manager Command Line Interface
The Command Reference
806
Default reactivation delay of 45 seconds is successfully set
c:\Program Files\Emulex\NIC Teaming>
Setting the Reactivation Delay of an Existing Team
Syntax
set reactdelay <delay value> <team-id>
Parameters
Description
This command changes the global reactivation delay value used by the specified team.
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe set reactdelay 45
FOTeam
Default reactivation delay of 45 seconds is successfully set for team
FOTeam
c:\Program Files\Emulex\NIC Teaming>
Forcing a Team to Failover
Syntax
failover <team-id>
Parameters
Description
This command forces the specified failover team to change the active adapter. If there is
more than one available adapter, the driver selects which adapter is to become the
active adapter.
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe set failover FOTeam
Manual failover successful on team FOTeam
c:\Program Files\Emulex\NIC Teaming>
delay value
Delay value in seconds. Valid values range from 1 to 200.
team-id
The name of the team that will use the global reactivation delay value.
team-id
The name of the team that is to change the active adapter.